Here is a video demonstration of how the attachment points are installed:

Video above shows the installation of our standard hardware. By marking the snap and pushing it against the attachment point this will leave a mark on the post to that the screw will be installed into.

When installing the track and zipper system you will mount your track flush with the inside edge of the attachment post. We recommend putting screws 1″ from the top and bottom and spaced out about every foot. If more screws are needed extra support screws are sent out with the hardware kit

When attatching to Brick/Concrete/Rock: PES reccomends using tap con screws. PES WILL NOT provide these and will need to be sourced at a local hardware store.

When attaching to wood: The hardware kit will include everything needed to install when attaching to wood. Screws are self drilling so predrilling holes is not required.

When attaching to Metal: When attaching to metal you made to predrill the metal depending on the thickness of the metal, The screws sent are not designed for drilling through thick steal. PES WILL NOT provide self drilling metal screws and recommends sourcing this at a local hardware store.