Matt Simington asked me to document an issue I am having. Relates primarily to roller panels A and B, the wind here the last two days has gusted up to 40+ mph, straining the panels and the snaps (inside the room mount). A few of the snaps don’t hold / came loose, putting extra pressure on others to hold the “sail”. One snap held but pulled the screw out of the aluminum column, a couple of other screws have loosened and are wiggling. There is one small place where vinyl on B pulled a couple of stiches loose from canvas edging near a snap.

I think the thing to do is add more snaps if that can be done. I’d like to add 4 more down the edge of these 2 panels, total of 16, spaced evenly between the lower existing fasteners. Can you help me do this? Thanks.