Watch as Cory from the PES team demonstrates a track-to-track installation, then read our Step-by-Step Instructions, below.

Step-by-Step Instructions:
Step 1: Depending on your configuration, your PES representative will recommend mounting side track either to outside or inside of post. Video demonstrates both of these options. Cut track to desired length, so there is no extra track at top or bottom of post.

Step 2: Mount track using 2” white screws, keeping track flush to edge of post. Space screws 12” Apart.

Step 3: For simple installation, each curtain zipper in your PES kit arrives labeled alphabetically, starting with your first panel or panel “A” on the leftmost outside of your configuration. For example: “AL” would be your first panel A, left side zipper; “AR” is panel A, right side zipper.) Once track is mounted, find the corresponding zipper for the panel. Slide zipper piece into track on each side as shown.

Step 4: (1:59) Once track and zipper are in place, it is time to hang the panel. On track systems we recommend starting the zipper on each side of the panel (2:13-2:56). This centers the panel for you and also helps hold the weight while putting in the top track screws.

Step 5: (2:57-4:00) Next push top track into place and screw in with 2” mounting screws.

Step 6: Depending on what side you would like to tie the panel off (left or right), the pulleys should follow a pattern of “Single, Double, Double”, with the last double pulley dropping the string towards the cleats.

Step 7: Finish zipping panel down to the bottom on each side. Your first panel is installed! Repeat Steps 1-7 for remaining curtains.

Find this page at  www.PorchEnclosures.com/ufaqs/track-track-installation-guide/